M-Bloc® Type X gypsum panels were developed as an improved mold and moisture resistant wallboard with a fire resistant core encased in a mold and moisture resistant blue face paper and brown back paper manufactured from 100% recycled paper. Additionally the core has been reinforced with fibers, increasing its strength and providing fire resistance ratings when used in tested assemblies. At an independent laboratory accredited in accordance with ISO 17025-2005, M-Bloc panels have been tested to the industry’s most rigorous standard achieving the best possible results per ASTM D3273 scoring a perfect 10 thus minimizing the risk of mold and mildew growth.
M-Bloc Type X gypsum panels are a lightweight cost efficient wall or ceiling panel for use throughout a project as well as the adhesive application of ceramic or plastic tile in limited wet areas, e.g., bathrooms, kitchens, laundry, and utility rooms. M-Bloc Type X gypsum panels are also approved for exterior soffits and/or sidewalls in protected corridors/breezeways with indirect exposure to the weather.
M-Bloc Type X interior gypsum panels have achieved UL Environment’s GREENGUARD GOLD Certification. GREENGUARD Certified products are scientifically proven to meet some of the world’s most rigorous, third-party chemical emissions standards, helping reduce indoor air pollution and the risk of chemical exposure while aiding in the creation of healthier indoor environments. For more information, visit www.ul.com/gg.
To obtain product certificate, please select the GREENGUARD link to the right.
|5/8" (15.9mm)||4' (1219mm)||8'-12' (2438mm-3658mm)||Tapered|
Gypsum board does not generate or support the growth of mold when it is properly transported, stored, handled, installed, and maintained. However, mold spores are present everywhere and when conditions are favorable; mold can grow on practically any surface. GYPSUM BOARD MUST BE KEPT DRY to prevent the growth of mold. Adequate ventilation shall be provided to prevent condensation.
Gypsum board that has visible mold growth must not be used. For additional information refer to Gypsum Association publication, “Guidelines for the Prevention of Mold Growth on Gypsum Wallboard” (GA-238).
Gypsum board must be stored in an area that protects it from adverse weather conditions, condensation, and other forms of moisture. Job site conditions that can expose gypsum board to water or moisture must be avoided.
Gypsum board must be protected during transit with a weather-tight cover in good condition. Plastic shipping bags are intended to provide protection during transit only and must be promptly removed upon arrival of the load. Failure to remove the shipping bag can increase the likelihood of developing conditions favorable to the growth of mold.
Gypsum board must be delivered to the job site as near to the time it will be used as possible. Individuals delivering gypsum board to jobsites should ensure that it is carried, not dragged, to place of storage/installation to prevent damage to finished edges.
Score of 10 (ASTM D 3273)
ASTM C 1396 section 5 (C 36)
Federal Specification - SS-L-30D Type III, Grade X
ASTM C 840
Gypsum Association GA-216
Gypsum Association GA-214
|Surface Burning Characteristics|
ASTM E 84
Flame Spread 0
Smoke Developed 0
Our products can contribute to the following credits within the Materials and Resources (MR) category.
Our products can contribute to the following credit within the Indoor Environmental Quality (IEQ) category.
To learn more please click the LEED link at right.
American Quality. American Values American Gypsum.Contact Us Today to Order!